EXAM#1: Building Scalable Cisco Internetworks  642-901 BSCI

Implement EIGRP operations

• Explain the functions and operations of EIGRP (e.g., DUAL).
• Configure EIGRP routing. (e.g., Stub Routing, authentication, etc.)
• Verify or troubleshoot EIGRP routing configurations.

Implement multiarea OSPF operations

• Explain the functions and operations of multiarea OSPF.
• Configure multiarea OSPF routing. (e.g., Stub, NSSA, authentication, etc.)
• Verify or troubleshoot multiarea OSPF routing configurations.

Describe integrated IS-IS

• Describe the features and benefits of integrated IS-IS.
• Configure and verify integrated IS-IS.

Implement Cisco IOS routing features

• Describe, configure or verify route redistribution between IP routing IGPs. (e.g., route-maps, default routes, etc.)
• Describe, configure or verify route filtering (i.e., distribute-lists and passive interfaces).
• Describe and configure DHCP services (e.g., Server, Client, IP helper address, etc.).

Implement BGP for enterprise ISP connectivity

• Describe the functions and operations of BGP.
• Configure or verify BGP operation in a non-transit AS (e.g., authentication).
• Configure BGP path selection. (i.e., Local Preference, AS Path, Weight or MED attributes).

Implement multicast forwarding

• Describe IP Multicast (e.g., Layer-3 to Layer-2 mapping, IGMP, etc.).
• Describe, configure, or verify IP multicast routing (i.e., PIM Sparse-Dense Mode).

Implement IPv6

• Describe IPv6 addressing operations.
• Describe IPv6 interoperation with IPv4.
• Describe, configure or verify OSPF routing with IPv6 addressing.

EXAM#2: Building Cisco Multi-layer Switched Networks   642-812 BCMSN

Implement VLANs

• Explain the functions of VLANs in a hierarchical network.
• Configure VLANs (e.g., Native, Default, Static and Access).
• Explain and configure VLAN trunking (i.e.,  IEEE 802.1Q    and ISL).
• Explain and configure VTP.
• Verify or troubleshoot VLAN configurations.

Conduct the operation of Spanning Tree protocols in a hierarchical network

• Explain the functions and operations of the Spanning Tree protocols (i.e., RSTP, PVRST, MISTP).
• Configure RSTP (PVRST) and MISTP.
• Describe and configure STP security mechanisms (i.e., BPDU Guard, BPDU Filtering, Root Guard).
• Configure and Verify UDLD and Loop Guard.
• Verify or troubleshoot Spanning Tree protocol operations.
• Configure and verify link aggregation using PAgP or LACP.

Implement Inter-VLAN routing

• Explain and configure Inter-VLAN routing (i.e., SVI and routed ports).
• Explain and enable CEF operation.
• Verify or troubleshoot InterVLAN routing configurations.

Implement gateway redundancy technologies

• Explain the functions and operations of gateway redundancy protocols (i.e., HSRP, VRRP, and GLBP).
• Configure HSRP, VRRP, and GLBP.
• Verify High Availability configurations.

Describe and configure wireless client access

• Describe the components and operations of WLAN topologies (i.e., AP and Bridge).
• Describe the features of Client Devices, Network Unification, and Mobility Platforms (i.e., CCX, LWAPP).
• Configure a wireless client (i.e., ADU).

Describe and configure security features in a switched network

• Describe common Layer 2 network attacks (e.g., MAC Flooding, Rogue Devices, VLAN Hopping, DHCP Spoofing, etc.)
• Explain and configure Port Security,802.1x, VACLs, Private VLANs, DHCP Snooping, and DAI.
• Verify Catalyst switch (IOS-based) security configurations (i.e., Port Security, 802.1x, VACLs, Private VLANs, DHCP Snooping, and DAI).

Configure support for voice

• Describe the characteristics of voice in the campus network.
• Describe the functions of Voice VLANs and trust boundaries.
• Configure and verify basic IP Phone support (i.e. Voice VLAN, Trust and CoS options, AutoQoS for voice

EXAM#3: Implementing Secure Converged Wide Area Networks  642-825 ISCW

Implement basic teleworker services

• Describe Cable (HFC) technologies.
• Describe xDSL technologies.
• Configure ADSL (i.e., PPPoE or PPPoA).
• Verify basic teleworker configurations.

Implement Frame-Mode MPLS

• Describe the components and operation of Frame-Mode MPLS (e.g., packet-based MPLS VPNs).
• Configure and verify Frame-Mode MPLS.

Implement a site-to-site IPSec VPN

• Describe the components and operations of IPSec VPNs and GRE Tunnels.
• Configure a site-to-site IPSec VPN/GRE Tunnel with SDM (i.e., preshared key).
• Verify IPSec/GRE Tunnel configurations (i.e., IOS CLI configurations).
• Describe, configure, and verify VPN backup interfaces.
• Describe and configure Cisco Easy VPN solutions using SDM.

Describe network security strategies

• Describe and mitigate common network attacks (i.e., Reconnaissance, Access, and Denial of Service).
• Describe and mitigate Worm, Virus, and Trojan Horse attacks.
• Describe and mitigate application-layer attacks (e.g., management protocols).

Implement Cisco Device Hardening

• Describe, Configure, and verify AutoSecure/One-Step Lockdown implementations (i.e., CLI and SDM).
• Describe, configure, and verify AAA for Cisco Routers.
• Describe and configure threat and attack mitigation using ACLs.
• Describe and configure IOS secure management features (e.g., SSH, SNMP, SYSLOG, NTP, Role-Based CLI, etc.)

Implement Cisco IOS firewall

• Describe the functions and operations of Cisco IOS Firewall (e.g., Stateful Firewall, CBAC, etc.).
• Configure Cisco IOS Firewall with SDM.
• Verify Cisco IOS Firewall configurations (i.e., IOS CLI configurations, SDM Monitor).

Describe and configure Cisco IOS IPS

• Describe the functions and operations of IDS and IPS systems (e.g., IDS/IPS signatures, IPS Alarms, etc.)
• Configure Cisco IOS IPS using SDM

EXAM#4: Optimizing Converged Cisco Networks 642-845 ONT

Describe Cisco VoIP implementations

• Describe the functions and operations of a VoIP network (e.g., packetization, bandwidth considerations, CAC, etc.).
• Describe and identify basic voice components in an enterprise network (e.g. Gatekeepers, Gateways, etc.)

Describe QoS considerations

• Explain the necessity of QoS in converged networks (e.g., bandwidth, delay, loss, etc.).
• Describe strategies for QoS implementations (e.g. QoS Policy, QoS Models, etc.).

Describe DiffServ QoS implementations

• Describe classification and marking (e.g., CoS, ToS, IP Precedence, DSCP, etc.).
• Describe and configure NBAR for classification.
• Explain congestion management and avoidance mechanisms (e.g., FIFO, PQ, WRR, WRED, etc.).
• Describe traffic policing and traffic shaping (i.e., traffic conditioners).
• Describe Control Plane Policing.
• Describe WAN link efficiency mechanisms (e.g., Payload/Header Compression, MLP with interleaving, etc.).
• Describe and configure QoS Pre-Classify.

Implement AutoQoS

• Explain the functions and operations of AutoQoS.
• Describe the SDM QoS Wizard.
• Configure, verify, and torubleshoot AutoQoS implementations (i.e., MQC).

Implement WLAN security and management

• Describe and Configure wireless security on Cisco Clients and APs (e.g., SSID, WEP, LEAP, etc.).
• Describe basic wireless management (e.g., WLSE and WCS). Configure and verify basic WCS configuration (i.e., login, add/review controller/AP status, security, and import/review maps).
• Describe and configure WLAN QoS.