" /> Cisco Certified Network Professional (CCNP) | Compu21

Setup Menus in Admin Panel


Setup Menus in Admin Panel

Cisco Certified Network Professional (CCNP)

EXAM#1: 300-101 ROUTE Implementing Cisco IP Routing (ROUTE) Implement EIGRP operations Explain the functions and operations of EIGRP (e.g., DUAL). …


    EXAM#1: 300-101 ROUTE

    Implementing Cisco IP Routing (ROUTE)

    Implement EIGRP operations

    • Explain the functions and operations of EIGRP (e.g., DUAL).
    • Configure EIGRP routing. (e.g., Stub Routing, authentication, etc.)
    • Verify or troubleshoot EIGRP routing configurations.

    Implement multiarea OSPF operations

    • Explain the functions and operations of multiarea OSPF.
    • Configure multiarea OSPF routing. (e.g., Stub, NSSA, authentication, etc.)
    • Verify or troubleshoot multiarea OSPF routing configurations.

    Describe integrated IS-IS

    • Describe the features and benefits of integrated IS-IS.
    • Configure and verify integrated IS-IS.

    Implement Cisco IOS routing features

    • Describe, configure or verify route redistribution between IP routing IGPs. (e.g., route-maps, default routes, etc.)
    • Describe, configure or verify route filtering (i.e., distribute-lists and passive interfaces).
    • Describe and configure DHCP services (e.g., Server, Client, IP helper address, etc.).

    Implement BGP for enterprise ISP connectivity

    • Describe the functions and operations of BGP.
    • Configure or verify BGP operation in a non-transit AS (e.g., authentication).
    • Configure BGP path selection. (i.e., Local Preference, AS Path, Weight or MED attributes).

    Implement multicast forwarding

    • Describe IP Multicast (e.g., Layer-3 to Layer-2 mapping, IGMP, etc.).
    • Describe, configure, or verify IP multicast routing (i.e., PIM Sparse-Dense Mode).

    Implement IPv6

    • Describe IPv6 addressing operations.
    • Describe IPv6 interoperation with IPv4.
    • Describe, configure or verify OSPF routing with IPv6 addressing.

    EXAM#2: 300-115  SWITCH

    Implementing Cisco IP Switched Networks (SWITCH)

    Implement VLANs

    • Explain the functions of VLANs in a hierarchical network.
    • Configure VLANs (e.g., Native, Default, Static and Access).
    • Explain and configure VLAN trunking (i.e.,  IEEE 802.1Q    and ISL).
    • Explain and configure VTP.
    • Verify or troubleshoot VLAN configurations.

    Conduct the operation of Spanning Tree protocols in a hierarchical network

    • Explain the functions and operations of the Spanning Tree protocols (i.e., RSTP, PVRST, MISTP).
    • Configure RSTP (PVRST) and MISTP.
    • Describe and configure STP security mechanisms (i.e., BPDU Guard, BPDU Filtering, Root Guard).
    • Configure and Verify UDLD and Loop Guard.
    • Verify or troubleshoot Spanning Tree protocol operations.
    • Configure and verify link aggregation using PAgP or LACP.

    Implement Inter-VLAN routing

    • Explain and configure Inter-VLAN routing (i.e., SVI and routed ports).
    • Explain and enable CEF operation.
    • Verify or troubleshoot InterVLAN routing configurations.

    Implement gateway redundancy technologies

    • Explain the functions and operations of gateway redundancy protocols (i.e., HSRP, VRRP, and GLBP).
    • Configure HSRP, VRRP, and GLBP.
    • Verify High Availability configurations.

    Describe and configure wireless client access

    • Describe the components and operations of WLAN topologies (i.e., AP and Bridge).
    • Describe the features of Client Devices, Network Unification, and Mobility Platforms (i.e., CCX, LWAPP).
    • Configure a wireless client (i.e., ADU).

    Describe and configure security features in a switched network

    • Describe common Layer 2 network attacks (e.g., MAC Flooding, Rogue Devices, VLAN Hopping, DHCP Spoofing, etc.)
    • Explain and configure Port Security,802.1x, VACLs, Private VLANs, DHCP Snooping, and DAI.
    • Verify Catalyst switch (IOS-based) security configurations (i.e., Port Security, 802.1x, VACLs, Private VLANs, DHCP Snooping, and DAI).

    Configure support for voice

    • Describe the characteristics of voice in the campus network.
    • Describe the functions of Voice VLANs and trust boundaries.
    • Configure and verify basic IP Phone support (i.e. Voice VLAN, Trust and CoS options, AutoQoS for voice

    EXAM#3: 300-135 TSHOOT

    Troubleshooting and Maintaining Cisco IP Networks (TSHOOT)

    Implement basic teleworker services

    • Describe Cable (HFC) technologies.
    • Describe xDSL technologies.
    • Configure ADSL (i.e., PPPoE or PPPoA).
    • Verify basic teleworker configurations.

    Implement Frame-Mode MPLS

    • Describe the components and operation of Frame-Mode MPLS (e.g., packet-based MPLS VPNs).
    • Configure and verify Frame-Mode MPLS.

    Implement a site-to-site IPSec VPN

    • Describe the components and operations of IPSec VPNs and GRE Tunnels.
    • Configure a site-to-site IPSec VPN/GRE Tunnel with SDM (i.e., preshared key).
    • Verify IPSec/GRE Tunnel configurations (i.e., IOS CLI configurations).
    • Describe, configure, and verify VPN backup interfaces.
    • Describe and configure Cisco Easy VPN solutions using SDM.

    Describe network security strategies

    • Describe and mitigate common network attacks (i.e., Reconnaissance, Access, and Denial of Service).
    • Describe and mitigate Worm, Virus, and Trojan Horse attacks.
    • Describe and mitigate application-layer attacks (e.g., management protocols).

    Implement Cisco Device Hardening

    • Describe, Configure, and verify AutoSecure/One-Step Lockdown implementations (i.e., CLI and SDM).
    • Describe, configure, and verify AAA for Cisco Routers.
    • Describe and configure threat and attack mitigation using ACLs.
    • Describe and configure IOS secure management features (e.g., SSH, SNMP, SYSLOG, NTP, Role-Based CLI, etc.)

    Implement Cisco IOS firewall

    • Describe the functions and operations of Cisco IOS Firewall (e.g., Stateful Firewall, CBAC, etc.).
    • Configure Cisco IOS Firewall with SDM.
    • Verify Cisco IOS Firewall configurations (i.e., IOS CLI configurations, SDM Monitor).

    Describe and configure Cisco IOS IPS

    • Describe the functions and operations of IDS and IPS systems (e.g., IDS/IPS signatures, IPS Alarms, etc.)
    • Configure Cisco IOS IPS using SDM

    Describe Cisco VoIP implementations

    • Describe the functions and operations of a VoIP network (e.g., packetization, bandwidth considerations, CAC, etc.).
    • Describe and identify basic voice components in an enterprise network (e.g. Gatekeepers, Gateways, etc.)

    Describe QoS considerations

    • Explain the necessity of QoS in converged networks (e.g., bandwidth, delay, loss, etc.).
    • Describe strategies for QoS implementations (e.g. QoS Policy, QoS Models, etc.).

    Describe DiffServ QoS implementations

    • Describe classification and marking (e.g., CoS, ToS, IP Precedence, DSCP, etc.).
    • Describe and configure NBAR for classification.
    • Explain congestion management and avoidance mechanisms (e.g., FIFO, PQ, WRR, WRED, etc.).
    • Describe traffic policing and traffic shaping (i.e., traffic conditioners).
    • Describe Control Plane Policing.
    • Describe WAN link efficiency mechanisms (e.g., Payload/Header Compression, MLP with interleaving, etc.).
    • Describe and configure QoS Pre-Classify.

    Implement AutoQoS

    • Explain the functions and operations of AutoQoS.
    • Describe the SDM QoS Wizard.
    • Configure, verify, and torubleshoot AutoQoS implementations (i.e., MQC).

    Implement WLAN security and management

    • Describe and Configure wireless security on Cisco Clients and APs (e.g., SSID, WEP, LEAP, etc.).
    • Describe basic wireless management (e.g., WLSE and WCS). Configure and verify basic WCS configuration (i.e., login, add/review controller/AP status, security, and import/review maps).
    • Describe and configure WLAN QoS.

    Course Reviews

    No Reviews found for this course.

    • 10 Days

    Advanced Course Search Widget

    Popular Courses

    Recent Posts